US construction estimating Services
Construction Estimating
Services in the USA.
Professional construction estimating services across the USA provide accurate quantity takeoffs, cost estimates, budgeting, bid support, and pre-construction planning for residential, commercial, and industrial projects.
Fast Turnaround
Highly Accurate
Industry Experienced
Call Us
+1 307 3964337
Email Us
info@kentandblake.com
Our Office
1500 N Grant St, STE R Denver CO 80203, USA
Business Hours
Mon-Fri: 8:00 - 5:00 PM
Sat-Sun: Closed
Estimating support in USA
- Contractor bid preparation
- Subcontractor trade pricing
- Material quantity verification
- Construction tender estimates
- Pre-construction cost planning
- Project feasibility discussions
- Procurement planning
- Scope and cost review
What Are Construction Estimating Services?
Construction estimating services determine the quantities and anticipated costs associated with completing a defined construction scope. The work typically begins by reading the plans and specifications as a coordinated set. An architectural floor plan may identify a wall, but the wall type schedule explains its construction. A reflected ceiling plan may establish ceiling areas while the specifications define the required system. Structural drawings provide information about concrete reinforcement or steel framing that may not appear on architectural sheets.
An estimator brings these pieces together. Once the scope is understood, measurable work is taken off from the documents. Those quantities can then be evaluated against materials, labor, equipment, subcontractor pricing, supplier information, allowances, or other relevant cost inputs depending on the estimate required.This creates a direct relationship between:
Drawings → Scope → Quantities → Costs → Construction Budget
A well-prepared estimate should make that relationship understandable to the person reviewing it.
Our Estimating Services
Comprehensive Estimating Solutions
Estimating requirements change throughout a project's lifecycle. Our services cover early planning through detailed bid-stage measurement and cost analysis.
Tender
Estimating
Tender drawings, specifications, addenda, and bid requirements are reviewed to quantify the defined construction scope and provide contractors with structured cost information before tender submission.
Learn More ⟶
Construction Cost Estimating
Detailed plans, specifications, labor requirements, materials, equipment, and applicable trade costs are evaluated together to establish a project-specific breakdown of anticipated construction expenditure.
Learn More ⟶
Residential Estimating
Plans for homes, additions, renovations, multi-family buildings, and developments are measured by relevant trade, helping residential contractors establish quantities, budgets and bid pricing.
Learn More ⟶
Commercial Estimating
Building systems, finishes, structural components, MEP work, and other commercial scopes are quantified and evaluated to support bidding procurement discussions, and contractor cost planning.
Learn More ⟶
Industrial Cost Estimating Consultant
Complex structural, civil, building-service, and equipment-related construction requirements are reviewed and quantified, giving project teams clearer cost information for industrial planning and scope evaluation.
Learn More ⟶
Construction Estimating Consultant
Professional estimating review helps teams interpret project documents, evaluate quantities and costs and investigate unclear scope before making important bidding, budgeting, or pre-construction decisions.
Learn More ⟶
Preliminary Estimating Services
Early design information is used to establish an initial cost framework before detailed documents are available, supporting feasibility review, funding discussions, and scope decisions.
Learn More ⟶
Preliminary Construction Cost Planning
Costs are evaluated as the design develops, allowing project teams to compare scope decisions, monitor allowances, identify budget-sensitive areas, and assess alternatives before construction documents are finalized.
Learn More ⟶
Quantity Takeoff
Drawings are systematically measured to establish quantities for materials, assemblies, fixtures, components, and trade work, providing a measurable basis for purchasing, estimating, and contractor bid preparation.
Learn More ⟶
Cost Estimating
Project requirements are converted into measurable quantities and organized cost components, giving contractors and owners a practical basis for budget development and construction decisions.
Learn More ⟶
What Does a Construction Estimate Include in the USA?
A construction estimate combines measurable project scope with the cost components required to complete that work. Depending on the project and requested service, an estimate may contain:
- Quantity takeoff: Measured work and material quantities
- Material costs: Products and materials required by the scope
- Labor costs: Labor associated with installation or construction activities
- Equipment: Relevant equipment required to perform the work
- Subcontracted Scope: Trade work priced separately where applicable
- Allowances: Budget provisions for items not fully defined
- Assumptions: Conditions used where documents require interpretation
- Exclusions: Work specifically outside the estimating scope
- Cost breakdown: Organization of costs by trade, system, assembly, or work category
The contents should match the intended use of the estimate. A subcontractor bidding one trade needs different information from a developer reviewing the feasibility of an entire building.
Our Construction Estimating Process
- Project Information Review
- Drawing and Specification Review
- Quantity Takeoff
- Labor and Material Cost Analysis
- Scope and Cost Review
- Estimate Preparation
- Quality Review
- Estimate Delivery
Trade Estimating Services
Comprehensive Trade Estimating Services
Trade estimating concentrates on the measurable work within an individual construction discipline. This can help subcontractors prepare bids and allow general contractors to review quantities across trade packages.
Partition & Ceiling Estimating
Wall types, metal framing, drywall layers, insulation, ceiling grids and related assemblies are measured from plans and details for material and installation cost development.
Learn More ⟶
Landscaping Estimating
Landscape plans are reviewed for planting, turf, trees, irrigation-related items, and site features, providing measurable quantities for procurement and installation pricing.
Learn More ⟶
Render & Cladding Estimating
Cladding elevations, render areas, panel systems and specified exterior finishes are measured to establish material quantities and evaluate installation-related trade costs.
Learn More ⟶
Masonry
Estimating
Masonry walls, brickwork, concrete block, stone, mortar, reinforcement, lintels, and related accessories are quantified from plans and elevations for purchasing, labor analysis, and bidding.
Learn More ⟶
Carpentry Estimating
Wood framing, blocking, trim, doors, timber elements, and other specified carpentry items are identified and measured to support material calculations, crew planning, and trade pricing.
Learn More ⟶
Structural Steel Estimating
Beams, columns, framing members, plates, connections, and other structural steel elements shown on engineering documents are quantified for fabrication, material, erection, and budget assessment.
Learn More ⟶
Flooring Estimating
Floor plans and finish schedules are used to separate tile, carpet, wood, resilient flooring, and other finishes by area, supporting material ordering, waste calculations, and installation pricing.
Learn More ⟶
Civil & Sitework Estimating
Earthwork, excavation, grading, paving, curbs, storm water systems, other utilities, and other site related improvements are measured to support the civil budgets, trade bids, and fast early site planning.
Learn More ⟶
Roofing Estimating
Roof plans and details are measured for roofing systems, insulation, membranes, shingles, flashing, penetrations, and accessories, providing quantities for material procurement and contractor pricing.
Learn More ⟶
Electrical Estimating
Plans and schedules are reviewed for lighting, devices, panels, conduit, cabling, equipment connections, and related electrical scope to develop organized material and labor requirements.
Learn More ⟶
Electrical Estimating
Plans and schedules are reviewed for lighting, devices, panels, conduit, cabling, equipment connections, and related electrical scope to develop organized material and labor requirements.
Learn More ⟶
Plumbing Estimating
Plumbing fixtures, pipework, fittings, valves, equipment, and connections shown within the defined scope are quantified to assist contractors with purchasing, installation planning, and cost development.
Learn More ⟶
Cabinetry Estimating
Cabinet layouts, elevations, countertops, hardware, storage units, and specified millwork components are reviewed and quantified to assist with manufacturing, purchasing, installation, and cost preparation.
Learn More ⟶
Painting Estimating
Paintable wall and ceiling areas, doors, frames, trim, coatings, and specified finish systems are quantified so painters can assess material coverage, labor requirements, quantify their material and bid scope.
Learn More ⟶
HVAC Estimating
Mechanical plans are assessed for equipment, ductwork, diffusers, piping, fittings, controls, and associated HVAC scope, helping contractors organize material quantities and installation cost requirements.
Learn More ⟶
Concrete Estimating
Slabs, footings, foundations, walls, columns, formwork, reinforcement, and other concrete elements are measured from structural documents to support ordering, labor planning, and bid preparation.
Learn More ⟶
Need More Than a Rough Estimate?
Free estimating tools can provide a rough starting point, but they cannot replace a project-specific construction estimate. Send us your construction plans and get a detailed estimate built around your actual project scope.
FAQs
Frequently Asked Questions
Find answers to common questions about our estimation services.
Estimating fees vary according to project size, complexity, number of trades, drawing completeness, requested deliverables, and turnaround requirements. Project documents should be reviewed before determining the level of estimating work required.
Send the most complete project information currently available. Architectural, structural, civil, mechanical, electrical, plumbing drawings, specifications, schedules, addenda, scope documents, and bid instructions may all contain information relevant to the estimate.
Yes. A quantity takeoff can be prepared independently when you only need measured quantities rather than pricing. This can be useful for material planning, supplier inquiries, bid preparation, or internal cost calculations.
Yes, provided the limitations of the documents are recognized. Preliminary estimates can support early budgeting and feasibility, while assumptions and allowances address scope that has not yet been fully designed.
Labor can be included when it forms part of the requested estimating scope. Labor analysis may consider work quantities, installation requirements, construction methods, productivity considerations, and other project-specific factors.
Yes. Trade estimating can focus on individual scopes such as concrete, masonry, roofing, flooring, structural steel, electrical, plumbing, HVAC, painting, carpentry, and other construction disciplines.
Yes. Detailed quantities and cost information can provide an important basis for bid preparation. Contractors should also review contract conditions, bid instructions, commercial requirements, addenda, exclusions, and their own pricing strategy.
Look for clear scope definition, detailed quantity measurement, transparent assumptions, organized cost information, and careful document review. The estimate should help you understand the project rather than simply provide an unexplained total.
Yes. You can contact us with the information currently available. Our team can discuss your project and explain what documentation may be required to complete the estimating work.
Yes. Trade-specific estimating support can be provided based on the project scope, drawings, specifications, and requirements.
Still Have Questions?
Can’t find the answers you’re looking for?
Our team is here to help you.
Get a Construction Estimate Based on the Work You Are Actually Building
Our construction estimating and quantity takeoff services in the USA support projects from early budgeting through detailed bidding. Residential builders, commercial contractors, trade subcontractors, industrial project teams, developers, and owners can obtain estimating support based on their specific drawings and scope.
If you have plans ready for review, submit your drawings, specifications, and estimating requirements to begin evaluating the quantities and costs associated with your project.